Come one, come all! Growing up, one of our fondest memories was going to the circus. Entering the circus was like entering into a fantasy where wonders of the world dazzled us with magic tricks and the impossible became possible. Jugglers, clowns, and acrobats from all around the world had us in awe while a single ringleader captivated our attention with charm and charisma. This week at iLoveSexy, we would like to bring the circus to your workstation with this amazing DIY Top Hat tutorial. Large top hats may be out of style but a small top hat placed strategically on one side of the head looks simply enchanting with a hint of cheekiness. If you’re looking for something cute to match with Halloween costumes this year, this DIY top hat makes the perfect head accessory. We would say that this is one of our easiest DIY tutorials to follow along yet, because most of the steps involve gluing and cutting. And perhaps a little spray painting if you want to get fancy like we did. But stick around, try it out and of course, scroll down to the end of the tutorial for some spectacular picks from our exclusive Circus Collection! Let’s get started on our DIY top hat!
What you will need:
Stiffened felt (you should be able to find this at your local craft store such as JoAnn or Michael’s)
Black spray paint
Gold spray paint
Red ribbon (sheer)
Hot glue gun
1. Remove your flower from the stem. It should slide off with ease but if it happens to be attached with hot glue, then feel free to cut it off the stem with your scissors.
2. Lay your flower on top of some scratch paper. In an area with proper ventilation, begin spray painting your flower with the black spray paint. You may need 2-3 coats of spray paint, so wait around half an hour in between coats.
3. After your black spray paint has dried, lightly spray the gold spray paint on the top of the flower. Be careful not to spray too much, since you want just a light wash of gold for a washed-out, vintage look.
4. Use an object that is circular in shape and with a pencil, trace a circle into the stiffened felt. You will be cutting out several circles and these two will serve as the brim of your top hat. We measured the diameter of the large circle and it comes out to 5 inches.
5. Trace a second circle of equal diameter. Inside that circle, trace a smaller circle that is even from all sides, forming a doughnut.
6. Use your scissors and cut out the two circles you have so far.
7. Using your X-Acto knife, cut a slit in the middle of the circle. This step is not mandatory, but we highly recommend it for more control and precision for your cutting.
8. Insert your scissors into the slit and cut out the small circle out from the larger circle.
9. Using your doughnut shaped circle, trace two small circles. These two circles will serve as the top and bottom cover to your hat portion and are about 2.65 inches in diameter.
10. After you have finished cutting everything, you should have one large circle, one doughnut shaped circle and two small circles.
11. Trace two straight lines into the stiffened felt, about 4.5 inches apart.
12. Cut along the lines as neatly as you can. This will serve as the body of your hat portion.
13. Dispense hot glue along the edge of one side of the felt strip. Glue that end to the other end as neatly as you can, allowing for a small overlap of fabric. This should form a cylinder.
14. Dispense hot glue on the edge of the cylinder in sections to attach the small circle. After you have finished gluing around the whole cylinder, make sure the small circle is secure. Repeat this step for the other side of the cylinder.
15. Taking your X-Acto Knife again, cut two small slits about 1.5 inches apart in the center of the large circle.
16. Dispense hot glue onto your doughnut circle and attach it to the large circle.
17. Loop your ribbon through the slits you have made and adjust accordingly. The ribbon will be used to tie the top hat to your head.
18. Place hot glue in sections around the inside of your doughnut circle. Attach the cylinder securely and this should form your top hat. And now it’s time to decorate!
19. For our trim along the top hat, we glued the gold trim to the center of the sheer red ribbon. After that, we glued the ribbon to the hat, again in small sections.
20. This is how your top hat should look like so far.
21. Don’t forget about your lovely lace and flower! Cut out a small piece of lace and hot glue it to the back of the flower. This will really give your top hat a romantic, weathered feel.
22. Place a thin strip of hot glue along the bottom boning of the black feathers. Stick them behind the flower and now you are done!
This could not be more of a perfect time to say, “TA-DA!” Wouldn’t you agree? No one would be able to tell just how simple this DIY top hat was to make, because of all the beautiful little trinkets used to decorate it. You can find all sorts of arts and crafts goodies at your local craft store and can decorate according to the color and design that you want. You don’t have to go out and buy the exact same materials as we did when decorating and we highly encourage you to go a little crazy with decorating your top hat. Besides, you know what they say. A circus isn’t a good one without a little bit of craziness. And now that we have our lovely little top hat, let’s take a look at a few of the gorgeous Halloween costumes you can match them with.
Vintage Cigarette Girl
Big Top Show Stopper
Le Belle Harlequin
When it comes to the circus, there is much more than meets the eye. The circus is a place full of mystery, wonder and excitement. And what better way to relive your fondest childhood memories than to dress up as a circus performer? A clown, cigarette girl, ringleader–there are so many choices! Which one of these circus costumes was your favorite? Did you see any circus costumes that you liked in our collection? What did you think of the tutorial and will you be attempting this at home before Halloween comes along? We love to see comments so please leave us your thoughts in the comment box below!
Please let us see what awesome Halloween DIYs you have come up with! Don’t hesitate to send us pictures of any of our DIY tutorials that you have created via email at firstname.lastname@example.org, and we may post it up on our Instagram at @ilovesexycom. Check back again next week for an all-new DIY tutorial that will help get you pumped up for Halloween!